covered hinge, 36x36mm, stainless steel A4

Purpose of Use

The stainless steel hinge with cover / snap cover made of stainless steel A4 is a high-quality fitting specifically designed for use in corrosive and humid environments. Thanks to the A4 stainless steel (AISI 316) material, it is extremely rust-resistant and is excellently suited for outdoor and marine applications, where it securely and unobtrusively pivots doors, flaps, cabinets, or covers. The integrated snap cover completely conceals screw heads, ensuring a clean, modern appearance and protecting the fastening from dirt and moisture. It is ideal for combining durability with design without leaving visible mounting traces.

How It Works

The hinge operates on the principle of a classic folding mechanism: It consists of two plates – a base plate (for attachment to the frame) and a movable part (for mounting on the flap or door) – connected by a sturdy axis. The length is typically 60 mm, width 45 mm, and thickness 2 mm, with countersunk holes (2–3 holes per side with Ø 6 mm) for a flush installation. The snap cover clicks into place with one hand and can be opened with a slotted screwdriver if needed to access the screws. The swivel range is 180°, and the material ensures smooth, maintenance-free movement even under loads up to 50 kg per hinge.

Step-by-Step Assembly:

1. Preparation: Measure the hinge positions on the door and frame (distance approx. 10–15 cm from the edge). Mark the holes according to the hinge template.
2. Drilling: Use a drill bit with the appropriate diameter (e.g., 4 mm for pilot holes) and pre-drill the holes to avoid material splintering.
3. Fastening: Secure the base plate with stainless steel screws (M4–M5). Ensure straight alignment for even swinging.
4. Attach Cover: After mounting the movable plate, the snap cover locks in automatically. Test the opening mechanism.
5. Maintenance: Clean occasionally with mild soapy water; no additional lubricants needed, as the stainless steel is self-lubricating.

Examples of Use Cases

• Marine and Boat Building: Mounting lids on ship crates – the corrosion resistance protects against saltwater, and the cover prevents spray water ingress.
• Garden and Outdoor Furniture: For shed or terrace doors; withstands rain and UV radiation while the design-pure finish enhances the garden visually.
• Industry and Kitchens: In humid production areas or stainless steel furniture; example: flaps on sinks where hygiene and cleanliness are prioritized.
• Home and Design Projects: Invisible hinges for modern cabinets in bathrooms – combines functionality with a minimalist look.

With this hinge, you achieve not only reliability but also a professional finish. For more tips, contact our support!